September 22nd

DRILL BIT AUCTION

FEATURED ITEMS

  • 6 inch Sealed Bearing TCI Bits
  • 14.75 inch OB Milltooth Bits UNUSED
  • 26 inch to 22 inch TCI Bits UNUSED
  • Stabilizers
  • 4.5 inch to 4.75 inch Sealed Bearing TCI Bits
  • 14.75 inch Sealed Bearing Milltooth Bits
  • 8.75 inch Sealed Bearing TCI Bits
  • 34 inch VAREL UNUSED
  • PDC Bits2
  • 9.875 inch to 12.25 inch Sealed Bearing Milltooth Bits
  • 7.875 inch to 8.75 inch Sealed Bearing Milltooth Bits
  • 8.5 inch Sealed Bearing TCI Bits
  • 6.5 inch to 6.75 inch Sealed Bearing Milltooth Bits
  • 8.5 inch Sealed Bearing Milltooth Bits
  • 13.75 inch Sealed Bearing Milltooth Bits
  • 7.875 inch Sealed Bearing TCI Bits
  • Sealed Bearing Milltooth Bits1
  • PDC Bits1
  • 9.875 inch to 12.25 inch Sealed Bearing TCI Bits
  • Sealed Bearing Milltooth Bits2
  • 12.25 inch Sealed Bearing TCI Bits
  • 14.75 inch to 17.5 inch Sealed Bearing TCI Bits

AUCTION INFO

ADDRESS: Comanche Bit Service, Hwy 81 North, 73529
PREVIEW & CHECKOUT: Sept 17th Thru Sept 25th, 2021 (8a-5p)
CONTACT: Jimmy Diehl @ (580) 467-1483 (Cell)

SELLING SURPLUS FOR COMANCHE BIT SERVICE

SEALED BEARING TCI

(15) 4-1/2″ (3) UNUSED | (4) 4-3/4″ UNUSED | (1) 5″ UNUSED | (88) 7-7/8″ (2) UNUSED | (33) 8-3/4″ (12) UNUSED · (37) 8-1/2″ (7) UNUSED · (1) 9-1/4″ | (1) 9-7/8″ Spread | (11) 9-7/8″ (1) 2-Cone (3) UNUSED | (9) 10-5/8″ | (1) 11-1/4″ | (34) 12-1/4″ (5) UNUSED | (1) 13-3/8″ | (1) 13-1/2″ 2-Cone | (1) 13-3/4″ | (4) 14-3/4″ | (2) 16″ 2-Cone | (4) 17-1/2″ | (1) 18-1/2″ | (1) 20″ | (4) 22″ (1) UNUSED | (1) 24″ UNUSED | (2) 26″ UNUSED

SEALED BEARING MILLTOOTH

(1) 4-1/2″ | (37) 4-5/8″ | (7) 4-3/4″ | (3) 5-1/8″ | (3) 5-3/4″ | (1) 5-7/8″ UNUSED | (5) 6″ (1) UNUSED | (5) 6-1/8″ | (3) 6-1/4″ | (17) 6-1/2″ (1) UNUSED | (14) 6-3/4″ | (2) 6-7/8″ | (4) 7″ | (3) 7-1/4″ | (5) 7-5/8″ | (24) 7-7/8″ (3) UNUSED | (2) 8-3/8″ | (34) 8-1/2″ (15) UNUSED | (51) 8-3/4″ (3) UNUSED | (12) 9-7/8″ (1) 2-Cone (3) UNUSED | (8) 9-1/2″ | (1) 10-1/2″ | (4) 10-5/8″ (2) UNUSED | (1) 10-5/8″ 2-Cone UNUSED | (1) 10-3/4″ | (5) 11″ | (1) 11-3/8″ UNUSED | (62) 12-1/4″ (1) 2-Cone (4) UNUSED | (1) 13″ | (5) 13-1/2″ | (4) 13-3/4″ | (1) 14-1/2″ UNUSED | (8) 14-3/4″ (1) UNUSED | (1) 16″ UNUSED | (1) 17″ UNUSED | (6) 17-1/2″ | (1) 18-1/2″ UNUSED | (1) 18-1/4″ | (1) 20″ | (1) 24″ | (1) 26″

OPEN BEARING TCI

(1) 12-1/4″ | (1) 11″ | (3) 10-5/8″ | (1) 7-3/8″ | (1) 6-3/4″ | (3) 6-1/4″ | (1) 6-1/8″ | (2) 5-7/8″ | (1) 5-3/4″ | (1) 5-1/2″ | (1) UNUSED 5-1/4″ | (1) 4-1/2″ | (1) 4-1/4″ | (2) 4-1/8″

OPEN BEARING MILLTOOTH

(1) 34″ UNUSED | (2) 28″ (1) UNUSED | (1) 24″ | (2) 20″ | (1) 20″ 4-Cone UNUSED | (3) 17-1/2″ | (1) 15-1/4″ | (11) 14-3/4″ (4) UNUSED | (7) 13-3/4″ (1) UNUSED | (1) 13-1/2″ | (1) 13″ | (1) 12-1/4″ 2-Cone | (1) 11″ | (1) 9-7/8″ | (1) 9-1/2″ | (1) 9″ | (6) 8-3/4″ | (2) 8-5/8″ UNUSED | (4) 8-1/2″ (2) UNUSED | (3) 8-3/8″ (2) UNUSED | (7) 7-7/8″ (1) 2-Cone | (5) 7-5/8″ (4) UNUSED | (1) 7-3/8″• (10) 6-3/4″ (3) UNUSED | (2) 6-5/8″ UNUSED | (2) 6-1/2″ | (9) 6-1/4″ (4) UNUSED | (17) 6-1/8″ (13) UNUSED | (6) 6″ (5) UNUSED | (7) 5-7/8″ | (3) 5-3/4″ | (1) 5-5/8″ UNUSED | (1) 5-1/2″ UNUSED | (1) 5-1/8″ | (6) 4-7/8″ (1) UNUSED | (59) 4-3/4″ (15) UNUSED | (15) 4-5/8″ (8) UNUSED | (6) 4-1/2″ (3) UNUSED | (2) 4-3/8″ | (4) 4-1/4″ (1) UNUSED | (1) 4-1/8″ | (12) 3-7/8″ (10) UNUSED | (5) 3-3/4″ (3) UNUSED

PDC BITS (MATRIX & STEEL)

(1) 17-1/2″ | (2) 13-3/4″ | (9) 12-1/4″ | (2) 11″ | (1) 9-7/8″ | (1) 8-7/8″ | (19) 8-3/4″ | (9) 8-1/2″ | (8) 7-7/8″ | (5) 6-3/4″ | (1) 6-1/2″ | (2) 6-1/4″ | (10) 6-1/8″ | (1) 3-7/8″ | (1) ST 7″ SRWD | 6-1/4″ x 4″ Core Bit

(66) HANSON Chomper Bits w/Box Connections From 4-1/2″ to 1-7/8″ (Most UNUSED)

TRICONE CUTTER SECTIONS

(5) Bear Claw Bits From 9″ to 6-1/2″ | Approx (100) Sealed Bearing TCI & MT Cutter Sections From 17-1/2″ to 6″

MISC DRILL BITS & SUBS

HUGHES CHRISTENSEN 13-3/4″ EZC404Z EZY DRILL (UNUSED)

HUGHES CHRISTENSEN 9.70″ EZR EZY DRILL (UNUSED)

(2) HUGHES CHRISTENSEN 10-5/8″ EZR304HD EZY DRILL (UNUSED)

(2) HUGHES CHRISTENSEN 10-5/8″ EZR304 EZY DRILL (UNUSED)

UNUSED HAMMER BITS; (2) 12-1/4″ | (3) 8-3/4″ | (2) 8-7/8″ | (1) 6″ SDS6 | (2) 5-1/4″ | (2) 5″ IRI350 | (1) 4-7/8″ | (4) 4-3/4″ | (2) 5-1/8″

UNUSED Wing & Chevron Bits: (4) 6-1/4″ 3-Blade & (11) 5-5/8″ 3-Blade | (50) Asst’d Wing & Chevron Bits From 4-3/8″ to 7″ (Some UNUSED) | Hundreds of HERB J HAWTHORNE, ROCK MASTER & VAREL Replaceable Wing Bit Blades (UNUSED)

(5) Welded Blade Under Reamer Bits From 24″ to 12-1/4″ | (18) 4-Blade & 3-Blade Wing Bits From 22″ to 7″ | (22) 3-1/2″ to 1-3/4″ Bits w/ Rod Connections (Most UNUSED) | MILLS: 12-1/2″ | 6-1/4″ | NEW 4-3/4″, 4-1/2″, 4-1/8″ & 3-3/4″ | 6-3/4″ Tapered Mill

(3) 12-1/4″ Spiral Integral Blade Stabilizers | (4) 8-1/2″ Spiral Integral Blade Stabilizers | (16) 6-1/2″ Spiral Integral Blade Stabilizers | (15) Shopbuilt Straight Welded Blade Stabilizers; 6-3/4″ to 7-1/2″

TIW 4-1/2″IF Upper Kelly Valve | (12) Dbl Pin DC Changeover Subs | (2) Dbl Box DC Changeover Subs | (5) Asst’d DC Changeover Subs | EMPIRE Gas/Electric Shop Heater | (6) 8.15-15 & (4) 6.50-10 Solid Forklift Tires For CAT 60 Forklift

Date & Time:
Wednesday, September 22nd, 2021 @ 9:00AM (CDT)

Auction Location:
The Simmons Center
800 Chisholm Trail Parkway
Duncan, OK  73533
(580) 252-6127 (Tel) – Day of Sale Only
Directions: From the Holiday Inn Express in Duncan, go Hwy 81 South for .8 mile, then go right on Beech Ave for 1.0 mile, then go right on Chisholm Trail for 0.3 mile to Simmons Center on right.

Area Hotels:
Holiday Inn Express (Crew Headquarters) • 1520 Apollo Dr • Duncan, OK 73533 • (580) 251-9627 (Tel) • (580) 251-9846 (Fax)
Hampton Inn  2301 N. Hwy 81 Duncan, OK 73533 • (580) 255-1700 (Tel)
Days Inn  2535 N. Hwy 81, Duncan, OK 73533 • (580) 252-0810 (Tel)

Airports:
Will Rogers World Airport (OKC)
Halliburton Field (KDUC)

Online Bidding Provided by Proxibid. For more details and information visit www.ProxiBid.com or Call 1-877-505-7770.

On-site registration (Yard #1) begins Friday, September 17, 2021

Currency: USD

5% Admin Fee Will Be Charged on All On-site Purchases

8% Total Internet Bidding Fee Will Be Charged on All Internet Purchases

ALL Bidders must register and receive a bidder number. All purchases must be PAID IN FULL before equipment will be released. Acceptable forms of payment include Wire Transfer, Cashier’s Check or Personal/Company Check Accompanied by BANK LETTER OF GUARANTEE. No cash, drafts, credit cards or ACH payments will be accepted. All printed information regarding this sale is merely a guide, subject to change, and neither the auction Company, Sellers, nor Publishers shall be liable for any errors. ALL items are sold “AS IS, WHERE IS, WITH ALL FAULTS” without a warranty or guarantee of any kind, whether written, expressed or implied as to merchantability or fitness for a particular purpose. For a complete list of Bidding Terms & Conditions click the button below.

View Terms & Conditions
View Sample Bank Letter
View Bill of Lading Requirements

You Must be a customer in good standing to bid absentee. If we do not know you, a 50% wire transfer deposit will be required 24 hours prior to 9AM auction start. Foreign Buyer’s must be pre-approved 48 hours prior to 9AM auction start.

View Absentee Form

For questions, email: sue@superiorauctioneers.com or email: info@superiorauctioneers.com

Sales Tax will be charged on all purchases, unless the Buyer provides the proper exemption documents required by the local Government Tax Agency where the assets are located. Buyer agrees to pay all applicable sales tax on all purchases, unless they meet the requirements mentioned above. Buyer also agrees to pay any sales tax that may be assessed after initial payment has been received. International Buyers must pay the sales tax as shown on your invoice. Proper documentation must be provided in a timely manner to assist in obtaining any sales tax refund.

Jim Richie – TX Lic #13742

Dan Kruse – TX Lic #7674